HEX Sleeve Anchor Zinc Plated 1/4 3/8 5/16 1/2 ANSI HEX NUT SLEEVE ANCHOR

Maikling Paglalarawan:

Ang American casing gecko wire ay binubuo ng bolt, casing, hexagon nut at DIN125A gasket. Ito ay madaling i-install at patakbuhin. Ang butas ay drilled sa napiling lokasyon, at ang butas diameter at casing diameter ay pare-pareho. Ang naka-embed na haba ay nakumpirma ayon sa mas mababang haba ng nut. Ang packaging ng tuko na may hexagon nut sleeve ay puting maliit na kahon+kraft paper outer box+wooden pallet. Idikit ang label ng setting ng customer. Ang minimum na kapasidad ng pag-angat ay 1 kahon.

Magpadala ng email sa amin

Detalye ng Produkto

Mga Tag ng Produkto

Detalye ng Produkto

Laki ng produkto	Bolt thread(Φ)	Drill(Φ)	Haba ng Bolt(mm)	Box/Ctn(PCS)	Timbang Kgs/100Pcs
1/4*1-3/8	3/16	1/4	41.5	500/3000	7.5
1/4*2-1/4	3/16	1/4	61	250/1500	11
1/4*2-1/2	3/16	1/4	69	200/1200	13
5/16*1-1/2	1/4	5/16	46	200/1200	15
5/16*1-7/8	1/4	5/16	55.5	200/800	17.5
5/16*2-1/2	1/4	5/16	71	150/900	23
5/16*3	1/4	5/16	81	100/800	25
3/8*1-7/8	5/16	3/8	55	150/600	29
3/8*2-1/2	5/16	3/8	73	100/600	37
3/8*3	5/16	3/8	84	100/400	41
3/8*3-1/2	5/16	3/8	97	100/400	46
3/8*4	5/16	3/8	107	80/320	53
1/2*2-1/4	3/8	1/2	65	75/300	49
1/2*2-1/2	3/8	1/2	73	50/300	53
1/2*2-3/4	3/8	1/2	81	50/300	61
1/2*3	3/8	1/2	84	50/300	63
1/2*3-1/2	3/8	1/2	97	50/300	72
1/2*4	3/8	1/2	112	40/240	83
1/2*6	3/8	1/2	160	40/160	113
5/8*2-1/4	1/2	5/8	74.5	25/150	105
5/8*3	1/2	5/8	92	25/150	128
5/8*4-1/4	1/2	5/8	122	25/150	166
5/8*4-1/2	1/2	5/8	131	25/150	174
5/8*5-3/4	1/2	5/8	161	25/150	215
5/8*6	1/2	5/8	168	25/150	223
3/4*2-1/2	5/8	3/4	84	20/80	177
3/4*4-1/4	5/8	3/4	125	20/80	251
3/4*5-1/4	5/8	3/4	150	10/60	312
3/4*5-1/2	5/8	3/4	159	10/60	325
3/4*6-1/4	5/8	3/4	175	10/40	345

Tandaan: ang weighe ay ang sleeeve anchor hex nut at SAE washer

ITEM	pamantayan	1000 timbang
ANSI SLEEVE ANCHOR HEX NUT AT WASHER	1/4*1-3/8	9.18
ANSI SLEEVE ANCHOR HEX NUT AT WASHER	1/4 x 2	12.61
ANSI SLEEVE ANCHOR HEX NUT AT WASHER	1/4 x 2-1/4	13.99
ANSI SLEEVE ANCHOR HEX NUT AT WASHER	1/4 x 2-1/2	15.36
ANSI SLEEVE ANCHOR HEX NUT AT WASHER	1/4 x 3	18.11
ANSI SLEEVE ANCHOR HEX NUT AT WASHER	1/4 x 4	23.60
ANSI SLEEVE ANCHOR HEX NUT AT WASHER	5/16 x 1-1/2	13.96
ANSI SLEEVE ANCHOR HEX NUT AT WASHER	5/16*1-7/8	16.81
ANSI SLEEVE ANCHOR HEX NUT AT WASHER	5/16 X 2	17.76
ANSI SLEEVE ANCHOR HEX NUT AT WASHER	5/16x2-1/4	19.66
ANSI SLEEVE ANCHOR HEX NUT AT WASHER	5/16 X 2-1/2	21.56
ANSI SLEEVE ANCHOR HEX NUT AT WASHER	5/16 x 3	25.37
ANSI SLEEVE ANCHOR HEX NUT AT WASHER	5/16 x 4	32.97
ANSI SLEEVE ANCHOR HEX NUT AT WASHER	3/8 x 1-7/8	28.82
ANSI SLEEVE ANCHOR HEX NUT AT WASHER	3/8 X 2	30.26
ANSI SLEEVE ANCHOR HEX NUT AT WASHER	3/8 x 2-1/2	36.03
ANSI SLEEVE ANCHOR HEX NUT AT WASHER	3/8 x 3	41.80
ANSI SLEEVE ANCHOR HEX NUT AT WASHER	3/8 x 3-1/2	47.57
ANSI SLEEVE ANCHOR HEX NUT AT WASHER	3/8*3-3/4	50.45
ANSI SLEEVE ANCHOR HEX NUT AT WASHER	3/8 x 4	53.34
ANSI SLEEVE ANCHOR HEX NUT AT WASHER	1/2 x 2-1/4	50.81
ANSI SLEEVE ANCHOR HEX NUT AT WASHER	1/2 x 2-1/2	54.91
ANSI SLEEVE ANCHOR HEX NUT AT WASHER	1/2 x 2	46.71
ANSI SLEEVE ANCHOR HEX NUT AT WASHER	1/2*2-3/4	59.01
ANSI SLEEVE ANCHOR HEX NUT AT WASHER	1/2 X 3	63.12
ANSI SLEEVE ANCHOR HEX NUT AT WASHER	1/2 x 3-1/2	71.32
ANSI SLEEVE ANCHOR HEX NUT AT WASHER	1/2*3-3/4	75.42
ANSI SLEEVE ANCHOR HEX NUT AT WASHER	1/2 x 4	79.52
ANSI SLEEVE ANCHOR HEX NUT AT WASHER	1/2*4-1/4	83.63
ANSI SLEEVE ANCHOR HEX NUT AT WASHER	1/2*5	95.93
ANSI SLEEVE ANCHOR HEX NUT AT WASHER	1/2 x 6	111.90
ANSI SLEEVE ANCHOR HEX NUT AT WASHER	5/8*2-1/4	86.07
ANSI SLEEVE ANCHOR HEX NUT AT WASHER	5/8*3	107.33
ANSI SLEEVE ANCHOR HEX NUT AT WASHER	5/8x4	135.67
ANSI SLEEVE ANCHOR HEX NUT AT WASHER	5/8*4-1/4	142.76
ANSI SLEEVE ANCHOR HEX NUT AT WASHER	5/8*4-1/2	149.85
ANSI SLEEVE ANCHOR HEX NUT AT WASHER	5/8*5-3/4	185.28
ANSI SLEEVE ANCHOR HEX NUT AT WASHER	5/8*6	192.37
ANSI SLEEVE ANCHOR HEX NUT AT WASHER	3/4*2-1/2	153.80
ANSI SLEEVE ANCHOR HEX NUT AT WASHER	3/4*4-1/4	231.89
ANSI SLEEVE ANCHOR HEX NUT AT WASHER	3/4*5-1/4	276.51
ANSI SLEEVE ANCHOR HEX NUT AT WASHER	3/4*5-1/2	287.67
ANSI SLEEVE ANCHOR HEX NUT AT WASHER	3/4*6-1/4	321.14

FAQ

Q: Ano ang Iyong Pangunahing Pro Ducts?
A: Ang Aming Mga Pangunahing Produkto ay Mga Pangkabit: Bolts, Screw, Rod, Nuts, Washers, Anchors at Rivets. Samantala, Gumagawa din ang Aming Company ng Stamping Parts at Machined Parts.

T: Paano Tiyakin na Bawat Proseso ang Kalidad
A: Ang Bawat Proseso ay Susuriin ng Aming Departamento ng Pag-inspeksyon ng Kalidad na Sinisiguro ang Kalidad ng Bawat Produkto.
Sa Produksyon ng Mga Produkto, Personal Kaming Pupunta sa Pabrika Para Suriin ang Kalidad ng Mga Produkto.

Q: Gaano Katagal ang Iyong Paghahatid?
A: Ang aming Oras ng Paghahatid ay Karaniwang 30 hanggang 45 na Araw. o Ayon sa Dami.

Q: Ano ang Iyong Paraan ng Pagbabayad?
A: 30% Value ng T/t in Advance at Iba pang 70% Balanse sa B/l Copy.
Para sa Maliit na Order na Mas Mababa sa1000usd, Iminumungkahi Mong Magbayad ka ng 100% Paunang Paunang Bawasan ang Mga Singil sa Bangko.

T: Maaari Ka Bang Magbigay ng Sample?
A: Oo naman, Ibinigay ang Aming Sample nang Libre, ngunit Hindi Kasama ang Mga Bayarin sa Courier.